Frequency Adjustment: The Output frequency of the controller can be
manually adjusted to the resonant frequency of the vibratory feeder
to get a smooth, quiet, and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital
voltage regulation circuit can eliminate feed speed variation
caused by mains voltage fluctuation.
Time Adjustable Soft Start/Shutdown: During startup or shutdown,
the output voltage will gradually change to avoid sudden shock.
Soft start/shutdown time can be digitally preset.
Switch Sensor ON/OFF Control: An Adaptive switch sensor or PLC can
be connected to turn on/off the controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent
Photoelectric Sensor can be connected to turn on/off the
controller.
Remote Speed Control: Output Voltage of the controller can be
adjusted remotely by an external potentiometer, a PLC, a 1- 5V DC
signal, or a 4- 20mA current signal.
DC Control Output: The controller can output low-voltage DC power
associated with the ON/OFF Control of the controller to drive a
solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation
by pressing the ON/OFF button and holding for 2 seconds.
Overheat Protection: If the internal temperature of the controller
gets too high, the controller will stop its output to protect
itself.
Overcurrent Protection: If the output current exceeds its rated
value, the controller will stop its output to protect itself and
the load.
Over/Under-Voltage Protection: When the input voltage is too
high/low, the power supply will be automatically turned off for
self-protection.
Restorable Short Circuit Protection: If the output of the
controller is short-circuited, the controller will shut down its
output to protect itself and the load. But the fuse inside will not
be blown. When thereis no short circuit at the output side, the
controller will function again after being powered on.
