Automatic Constant Feed Speed Control: Automatic output voltage
adjustment in real-time to ensure constant preset feed speed
regardless of the weight change of the workpieces
Automatic Resonant Frequency Search: Search out and output the
resonant frequency of the load. Other related parameters are also
set automatically.
RS485 Communication: All parameters of the controller can be
adjusted via RS485.
Automatic Switch Sensor Type Recognition: The controller can
recognize and adapt to PNP and NPN switch sensors.
Digital Overheat Protection: If the controller's internal
temperature gets too high, it will stop producing heat to protect
itself.
Overcurrent Protection: If the output current exceeds its rated
value, the controller will stop its output to protect itself and
the load.
Restorable Short Circuit Protection: If the controller's output is
short-circuited, it will shut down to protect itself and the load.
But the fuse inside will not be blown. So, when there is no short
circuit at the output side, the controller will work again after
powering on.
Counting: Count the number of feed materials. The controller will
slow down or stop when counting up to the preset value.
Overvoltage Protection: If the input voltage is too high, the power
supply of the controller will shut down automatically to protect
itself.
