Capacitive Load: The controller is adaptive to resistive load, inductive load and
specially capacitive load such as a piezo vibrator.
Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real time to ensure
constant preset feed speed regardless of weight change of the
workpieces
Automatic Resonant Frequency Search: Search out and output resonant frequency of the load. other
related parameters are also set automatically.
RS485 Communication: All parameters of the controller can be adjusted via RS485.
Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PNP and NPN type
switch sensors.
Sync output: Sync output waveform of the slave controller with that of the
master controller to the same frequency and phase to avoid beat
effect.
Remote Speed Control: Output Voltage/Feed Speed of the controller can be adjusted
remotely by an external potentiometer, a PLC, a 1-5V or 4-22mA DC
signal.
Digital Overheat Protection: If internal temperature of the controller gets too high, the
controller will stop its output to protect Itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will
stop its output to protect itself and the load.
Restorable Short Circuit Protection: If output of the controller is short-circuited, the controller
will shut down its output to protect itself and the load. But the
fuse inside will not be blown So when there is no short circuit at
the output side, the controller will work again after power on.
