Capacitive Load: The controller is adaptive to resistive load, inductive load and
specially capacitive load such as a piezo vibrator.
Frequency Adjustment: The output frequency of the controller can be manually
adjusted to resonant frequency of the vibratory feeder to get
smooth, quiet and energy-saving feed effect.
Time Adjustable Soft Start: The controller will gently increase output voltage from 0 to the
preset value when power on to avoid sudden shake. Soft start time
can be digitally preset.
Switch Sensor ON/OFF Control: 1 NPN switch sensor PLC can be connected to turn on/off the
controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn
on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an
external potentiometer, a PLC, or a 1-5V DC signal
DC Control Output: The controller can output low voltage DC power associated with
ON/OFF Control of the controller to drive a glenoid or other
external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing
the oN/OFF button and hold for 2 seconds.
Overvoltage Protection: If input voltage is too high, power supply of the controller will
be shutdown automatically to protect itself.
Digital Overheat Protection: If internal temperature of the controller gets too high, the
controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will
stop its output to protect itself and the load.
Restorable short circuit Protection: if output of the controller is short-circuited, the controller
will shut down its output to protect itself and the load. But the
fuse inside will not be blown So when there is no short circuit at
the output side, the controller will work again after power on.
